Core cutting charges in Bur Dubai depend on the hole size, the depth of the concrete, the steel inside, how easy the site is to reach, and how many holes you need, so the best way to know your price is a site visit and a written quote. This guide explains what core cutting is, what is included in a price, how charges per inch are worked out, what changes the cost in older buildings, tips to save money, and how to compare offers. You will also find answers to common questions at the end.
Bur Dubai is a busy and historic part of the city, with shops, offices, apartments, and many older buildings. When owners and contractors need holes for pipes, cables, or air-conditioning lines, the first question is always about cost. The honest answer is that it depends, and this guide shows you why. At FK Technical Service, we help homeowners, shop owners, and builders across Dubai with clear and fair quotes. Read on so you know what to expect before you call anyone.
What Is Core Cutting?
Core cutting, also called core drilling, is a method of making clean, round holes in concrete, walls, floors, and slabs. It uses a hollow drill bit with diamond pieces on the edge. The bit cuts a perfect circle and leaves a solid round piece of concrete, called a core, which is lifted out.
This method is popular because it is neat and strong. The edges are smooth, the shaking is low, and the wall or floor around the hole stays safe. It is used for:
- Water and drain pipes
- Electrical cables and conduits
- Air-conditioning ducts and refrigerant lines
- Fire and safety lines
- Anchor and bolt holes
- Test cores for checking concrete strength
- Corner holes before larger cuts
Holes can be small, like a hole for a thin cable, or very large, like an opening for a duct.
What Affects Core Cutting Charges in Bur Dubai?
No two jobs are the same, so no two prices are the same. These are the biggest factors that effects Core cutting charges in Bur Dubai,
Hole Size
Bigger holes need bigger bits, stronger machines, and more time. A large hole costs more than a small one, even in the same wall.
Depth and Thickness
A hole through a thin wall is quicker than a hole through a thick slab or beam. More depth means more cutting time and more wear on the bit.
Steel Inside the Concrete
Steel bars make drilling slower and wear out diamond bits faster. If the concrete has a lot of steel, the price can go up.
Number of Holes
More holes in the same visit often lower the price per hole, because the team sets up once. But the total will still be higher than for one hole.
Location and Access
Stairs, small lifts, high floors, basements, and long carrying distances add effort. In busy areas, parking and loading near the building can also add time.
Working Hours
Night work, weekend work, or short work windows need extra planning and may cost more. Some buildings only allow noisy work at certain hours.
Water, Dust, and Protection
Finished shops and homes need floor covers, dust barriers, and slurry clean-up. This takes extra time and materials.
Scanning and Extra Work
Scanning for hidden steel, pipes, and cables adds a small cost but protects you from big mistakes. Patching, sealing, and approvals are usually separate.
Core Cutting Charges Per Inch: How Hole Size Changes the Price
Many companies in the region quote core cutting charges per inch. This means the Core cutting charges in Bur Dubai depends on the width of the hole, which is called the diameter, measured in inches. A larger number of inches means a bigger hole and a higher price.
Here is how it often works:
- Small holes: Cost less, because the bit is small and the cut is quick.
- Medium holes: Cost more, because they remove more concrete and take longer.
- Large holes: Cost the most, because they need heavy machines and more time and care.
Some companies also include depth in the price. For example, a hole through a very thick slab may cost more than a hole of the same width through a thin wall. Others charge one rate per inch of width and then add extra for extra depth.
This pricing method is common, but it is not the only one. Always ask the company how they work out the total, so you can compare quotes fairly. Do not assume that two companies using “per inch” pricing include the same things, like scanning, dust control, or clean-up.
Core Cutting Rate: Per Hole, Per Inch, or Per Day
Different companies charge in different ways. Knowing the methods helps you compare quotes.
- Per hole: A fixed price for each hole of a given size and depth. Clear and simple for small jobs.
- Per inch: The price depends on the hole width, as explained above.
- Per hour or per day: A team and machine are booked for a set time. This is common for larger jobs or when conditions are unclear.
- Fixed project price: A lump sum for the whole job after the site visit.
- Minimum charge: Many companies have a smallest job price, because moving the team and machines costs time even for small work.
None of these is always better. A per-hole or per-inch price is clear for simple jobs. A fixed price is good when the job is well defined. A core cutting rate that looks low may leave out items you will have to pay for later.
Why Core Cutting Charges in Bur Dubai Can Be Different for Older Buildings
Bur Dubai has many older buildings, and this can change the price and the way the job is done. Here is why:
- Missing or old drawings: Plans may be hard to find, so the team may need to scan more carefully to find steel and pipes.
- Unknown pipe and cable routes: Over many years, repairs and changes may have added pipes and wires in unexpected places.
- Different construction: Older slabs and walls may have different steel layouts or concrete quality.
- Tight access: Narrow stairs, small lifts, and tight streets can make it harder to bring machines in.
- Occupied spaces: Shops and homes below or beside the work area need extra care for dust, water, and noise.
A good team does not guess in these cases. It checks the area first, plans the work, and tells you clearly if the job may take longer. This can raise the price a little, but it protects you from damage and bigger repair bills.
Simple Examples of How the Price Changes
These examples show how different jobs change the cost. They do not give exact numbers, because every site is different.
Example 1: Two small holes for cables in a wall. This is a small job. The price depends on the hole size, wall thickness, and steel inside. A minimum charge may apply.
Example 2: Six medium holes for pipes in a slab. More holes and thicker concrete mean more time. Doing all six in one visit helps keep the total lower than separate visits.
Example 3: One large hole for a duct. A big hole needs a big bit and a strong rig. The price per inch is higher, and extra care is needed so the core does not fall.
Example 4: A set of holes in an older shop building. The team may need more scanning and careful planning, and access may take longer. This can add to the total, but it helps avoid hitting hidden pipes.
In every case, the best Core cutting charges in Bur Dubai comes from a real site visit.
Tips to Lower Your Core Cutting Charges in Bur Dubai
You cannot control every factor, but you can often save money with a few smart steps:
- Plan all holes together. Doing everything in one visit is cheaper than calling the team back again and again.
- Share clear plans. Exact sizes, positions, and depths save time and avoid mistakes.
- Know your hole sizes. Ask your plumber or electrician for the exact diameters before you book.
- Clear the area. Move furniture and give easy access for machines.
- Book early. Last-minute and urgent jobs can cost more.
- Sort out permissions in advance. Missing approvals can lead to extra visits.
- Ask what is included. Make sure scanning, dust control, and clean-up are clear in the quote.
- Do not cut safety. Skipping scans or protection can cost much more if something goes wrong.
How to Compare Quotes for Core Cutting Charges in Bur Dubai
When you get two or three offers, do not look only at the total. Compare these points:
- Hole sizes and depths: Does the quote list each size clearly?
- Pricing method: Per hole, per inch, per day, or fixed?
- What is included: Scanning, dust control, protection, and clean-up
- What is extra: Patching, sealing, and approvals
- Time: How many hours or days, and at what working times?
- Minimum charge and call-out fees: Are there other fees?
- Safety: Do they explain how they manage dust, water, and risk?
- Payment terms: When is payment due?
A clear, detailed quote is a good sign. A vague quote with only a total price is a warning sign.
Core Cutting Charges Near Me: How to Choose the Right Team
When you search for core cutting charges near me, you will see many results. Use this checklist to choose well:
- Local experience: Pick a team that works in Dubai and knows local building rules.
- Right equipment: Diamond bits, rigs, and dust control show a proper setup.
- Scanning before drilling: Ask if they check for steel, pipes, and cables first.
- Trained team: Skilled operators make fewer mistakes.
- Experience with older buildings: Ask about similar jobs in older areas.
- Safety plan: Ask how they handle dust, water, and falling cores.
- Clear quote after a site visit: Be careful with prices given blindly over the phone.
- Fast reply: Quick answers show they care about your timeline.
- Plain talk: They should explain things in simple words.
Why Choose FK Technical Service?
At FK Technical Service, we focus on safe, neat, and on-time work for homes, shops, offices, and industrial sites across Dubai. We visit your site, explain the options in plain words, and give you a clear written quote. We choose the right drilling method for each job, protect your property, keep dust and water under control, and clean up when we finish.
Visit our website to tell us about your project and ask for a clear quote.
Frequently Asked Questions
What are the average core cutting charges in Bur Dubai?
There is no fixed average, because each job is different. The price depends on hole size, depth, steel inside, number of holes, access, and working hours. The only reliable way to know your price is a site visit and a written quote.
Why is core cutting priced per inch?
Hole width affects how much concrete must be removed and what size bit and machine are needed. Pricing per inch is a simple way to reflect this. Some companies also add depth to the price.
Is a low core cutting rate always a good deal?
Not always. A low rate may leave out scanning, dust control, or clean-up. Poor work can also cause damage that costs more to fix. Compare the full scope, not just the rate.
Is there a minimum charge for small jobs?
Many companies have one, because moving machines and a team takes time even for a small job. Ask about it before you book.
Does the price include scanning?
Sometimes yes, sometimes it is extra. Scanning is worth it, because hitting a pipe or cable can cost far more than the scan.
Can I get a price over the phone?
You may get a rough idea, but a firm price needs a site visit. Photos and plans help, but a visit shows hidden problems like thick steel or tight access.
Do older buildings cost more?
Sometimes, because they may need more scanning and careful planning, and access can be harder. But a good team can tell you after a site visit, so you know before you start.
How can I make sure I am not overpaying?
Get two or three written quotes after site visits, and compare hole sizes, pricing methods, and what is included. Do not choose only on the lowest price, and ask the company to explain anything you do not understand.
Final Thoughts
Knowing what drives the price makes it easier to plan your budget and compare offers fairly. Core cutting charges in Bur Dubai come down to hole size, depth, steel, access, number of holes, and the quality of the work. Plan your holes together, ask clear questions, and always get a written quote after a site visit. If you need a fair, clear price from a team you can trust, contact FK Technical Service and let us handle the heavy work.
